Commercial Door Repair Bethesda, MD

Commercial Door Repair Bethesda, MD

Project Description

The storefront door of this diner business in Bethesda, MD, had been far slower to close in the past weeks. So they called us at MacArthur Locks & Doors, and our team was all set to take on the challenge. After checking it out, we noticed the hinges were worn out and rusty. We quickly identified the right solution for the situation. Our team quickly swapped out the old hinge with a new set of pivot hinges. These new hinges in aluminum case finish are strong and weatherproof. After the door was put back into place, we applied it with WD-40 silicone lubricant. It provided a quick, seamless closing motion, just like before. Sure enough, the problem was solved. The client was absolutely thrilled with our work. Thanks to our commercial door repair experts, they do not have any slow-closing doors to worry about.

Replacing pivot hinges on commercial doors is an important task to ensure the safety and proper functioning of the door. You must use the right kind of hinge and ensure proper installation and maintenance. Let us explain in detail how to replace pivot hinges on commercial doors. Allow us to provide a comprehensive guide on this process, covering various hinge options, essential tools, materials, and the step-by-step procedure involved in the replacement.

How To Replace A Storefront Door Pivot Hinge

Below is the step-by-step guide for replacing the pivot on your storefront door.

Remove the top and bottom pivots.

Before you start, make sure the door closer is removed. Check the upper section of the door frame and loosen the screws to remove the top pivot. Once done, gently lift the door off the bottom pivot. Unscrew the mounting screws to remove the components of the top pivot, bottom pivot, and door jamb. Sometimes, you may also have to take off the door threshold to remove the bottom pivot. 

Install the spring-loaded pin top pivot on the door.

Find your door's top pin. On the back, there is a small pin that keeps the spring in place. Put the pin in the door's stile and screw in the big hinge pin with the up side facing out.

Install the door's bottom pivot bearing.

Locate the bottom pivot bearing. When you have it in sight, attach it to the base of the door stile with great care. Be sure that the bearing is pointing downward toward the ground. Now your door is ready to swing open.

Mount the top pivot bearing.

Find the littlest piece of your door frame and connect it to the top edge of the door. Then, screw it in place. This part should be facing down toward the ground. Make sure it is nice and secure.

Install the bottom pivot pin.

To get the right door height, look for the bottom pivot pin. Compare its size to the original one. Use a wrench to adjust the nut at the bottom of the pin and tighten the set screw if needed. Finally, attach it to either the door frame or threshold. See whether both pins are the same height to avoid making future adjustments.

Put the door back in the frame.

Lift the door and place the bottom pivot bearing onto the pin. Next, depress the top pivot pin to fit the door into the top pivot bearing. Check if everything is in place, then swing the door around and check that it works. Lastly, attach the door closer. 

When to Call a Commercial Door Repair Bethesda, MD, Expert

It pays to be proactive when it comes to the upkeep of your commercial doors. A sudden breakdown can halt operations, resulting in costly delays and setbacks. By enlisting expert help from trusted door repair specialists, you can minimize the risk of unexpected malfunctions and ensure your door is maintained in optimum condition.

Commercial Door Repair Near Me

Are broken door locks and faulty hinges causing your business headaches? With MacArthur Locks & Doors, you can put those frustrations behind you. Our high-quality door repair services are designed to get your commercial doors working as smoothly as possible.

With exceptional service and dependability, our experts are committed to giving each client the attention they deserve. Plus, all our repairs come with a warranty, and our technicians work quickly and efficiently to get the job done right. Do not wait. Call us today and get the door repair services you can depend on in and around Bethesda, MD.

Project Gallery

Recent Projects

Comments

Location

Cordell Ave Bethesda, MD, US, 20814

Powered by LocalWiz.app
Contact Us
MacArthur Locks & Doors
https://macarthurlocksanddoors.com/
(202) 760-4589
Open Daily 6AM - 11PM
Facebook
Call Now