Office Door Lock Repair Arlington

A business in Arlington, VA, had a major security concern—a stuck office lock that wouldn’t turn properly. Worried about unauthorized access and daily inconvenience, they reached out to MacArthur Locks & Doors for commercial door lock repair.

Here's a step-by-step process on how we restore the broken lock:

Step 1: Finding the Root of the Problem

We arrived on-site and inspected the lock right away. Guess what our locksmith found? A deadbolt broken in locked position. After removing the cylinder, we saw that dirt, grime, and worn-out pins were causing the key to jam.

Step 2: Replacing Internal Parts for a Smooth Turn

Rather than replacing the entire lock, we replaced the damaged pins and springs inside the cylinder. This way, we restored proper alignment, allowing the lock to function as it should.

Step 3: Cleaning and Lubricating the Lock

Dirt and old grease had built up inside, so we cleaned out the lock mechanism and sprayed a fresh coat of lubricant to ensure smooth operation.

Final Testing and a Secure Office Once Again

Once reassembled, we tested the lock multiple times to see if it opened and closed well. The result did not disappoint. The client felt relieved to have their office secure again—without the cost of a full lock replacement.

Is your commercial lock giving you trouble? Let's go over some of the common culprits and how to keep those issues at bay.

Deadbolt Stuck? Here’s Why It Happens and How to Fix It

Imagine this: You arrive at your Arlington office early in the morning, ready for a productive day. But when you insert your key to unlock the door, the deadbolt is stuck. No matter how much you wiggle the key, the lock refuses to budge. How frustrating that is. It is sad to say that this is a common problem for business owners, and it usually happens due to wear and tear, misalignment, or internal damage.

Why Does a Deadbolt Get Stuck?

1. Misalignment: Over time, doors shift due to weather changes or regular use. If the deadbolt does not align with the strike plate, it can get stuck.

2. Rust and Dirt Buildup: If you don’t clean and lubricate your lock as often, dirt, dust, and rust can build up inside it, making it hard for the deadbolt to move.

3. Broken Internal Parts: Deadbolts have small springs and pins that wear out after some time. When these parts fail, the deadbolt can break in the locked position.

4. Forcing the Lock: Using excessive force to turn the key can cause damage, leading to a stuck or broken deadbolt.

How to Prevent a Broken Deadbolt

• Always clean and lubricate your lock to prevent dirt buildup.

• Check door alignment from time to time to ensure the deadbolt moves freely.

• Avoid forcing the key if the lock feels tight. Instead, call a commercial locksmith for help.

• Schedule routine lock maintenance with a professional to keep your locks in top shape.

Nothing is worse than trying to unlock your business door. If you’re dealing with a deadbolt broken in the locked position, don’t panic! Reach out to the best locksmith Arlington experts near you.

Time is money, and a faulty lock can slow down your business. Locked out or dealing with a broken lock? No worries! Trust MacArthur Locks & Doors for same-day locksmith service. Our commercial lock repair experts will diagnose and fix the problem fast so you don’t lose valuable time. Whether you need a lock adjustment, repair, or a complete lock replacement, we’ve got you covered. Call us now and get back to business hassle-free!