A door warping is an unfortunate event that often occurs in ordinary homes. It can happen in almost every type of door, including interior and exterior, solid, hollow, and raised panels. This wood condition applies to both new and old doors, but it is especially true for older doors. But why does wood warp in the first place? When that happens, should you contact door replacement services? What else should you know before enlisting the help of door installation services like MacArthur Locks & Doors?
What Exactly Is Door Warping?
Wood warping is a malformation that can occur in a variety of woods. It happens when the other wood components change in different ways. For instance, if one part of the wood dries faster than the other, the wood may shrink. Manufacturers and sellers try to avoid warping, but it usually occurs after the finished product is delivered to the customer. You should replace a door if it has gotten significantly warped. If the door is not badly bent, a door repair service can fix it.
Why Do Doors Warp?
In layman’s terms, wood warps are caused by uneven drying of the wood fibers within them. Wood with higher moisture content is more prone to warping than wood with lower moisture content. Wood can also warp as a result of the amount of moisture in the air. A rise in humidity, heat, or moisture entering your doors can also cause warping. The amount of shrinkage and warping varies from piece to piece of wood.
Warping on doors becomes more noticeable as damp wood dries up in the spring and summer months. To add, taller doors are more likely to warp than shorter ones. Aside from the causes described above, your door could warp for other reasons.
Door warping caused by excessive heat
Too much heat will cause the door to expand. That is often caused by a moisture imbalance between your home’s exterior and interior. Also, the wood may fracture or split due to the rapid increase in temperature.
Wood swells when it is damp or humid. Because the problem is widespread, some builders require homeowners to keep their air conditioners turned on to honor their warranties.
Check the screws that keep the door together. You may notice that the door starts to catch as you open or close it if they are stripped. Reduce the pressure when drilling the new screws as the door starts to lift into the stud.
Only one side of the door is finished
Doors are frequently glazed over with a clear finish after they have been painted. The reason behind this is to extend the life of the wood. On the other hand, some homeowners choose different treatments for their doors to achieve a specific aesthetic, such as a stained or vintage look. Hence, the door may warp if only one side is painted or if each side has a different finish.
Improper sealing can lead to door warping
Removing a door from the doorjamb and sealing it will only do a little if it is already warped. When you get a new door, seal all six sides while they are all even. Not many homeowners know, but the manufacturer or seller may void any existing warranties if you do not seal all six sides. If you are storing away new doors, keep them somewhere dry until you are ready to install them.
Door Repair Services from MacArthur Locks & Doors
Now that you know why causes a door to warp, where can you find door repair Washington DC professionals? When hiring door installation Washington DC experts, MacArthur Locks & Doors is always there, seven days a week. We also guarantee client satisfaction, so you can rest assured that you get the best service you deserve. Call us today to learn more about our products and services.