(202) 760-4589 [email protected]

During the lifetime of your solid wood door, it may warp or bow. Almost any type of wood door, including interior and exterior, solid, hollow, or raised panel, can warp. This is true of new doors as well, but it is particularly true of older doors. But why does it warp, and when should you call door replacement services? And what should you know before hiring a door installation service?

What is warping? 

Wood warping is a deformity, and it can happen in different kinds of woods. In particular, it occurs when the other parts of wood do not change uniformly. For example, if one portion of the wood dries faster than another, it can shrink. Warping is something that manufacturers and sellers try to avoid, but it usually happens after the finished product reaches the client. When a door becomes substantially bent, it is recommended to replace it. A door repair service can, however, fix the door if it is not significantly deformed.

Why do doors warp?

The simple explanation is that wood warps result from uneven drying of the wood fibers within it. Some types of wood have a higher moisture content than others, making them more prone to warping. The amount of moisture in the air can also cause wood to warp. A rise in humidity, heat, or moisture entering your doors can also cause warping. The degree of shrinkage and warping will differ from one piece of wood to the next.

Warping on doors becomes more visible when damp wood begins to dry out in the spring and summer months. Taller doors tend to be more prone to warping than those that are shorter. Aside from the reasons listed above, there are other ways that your door might warp.

Excessive Heat

Too much heat might cause the door to expand. This can happen because of a moisture imbalance between the exterior and interior of your home. When the temperature suddenly changes, the wood may even crack or split as a result.

Misaligned Latch 

Even if the latch is off by the tiniest of margins, the door may not be able to close correctly. If this happens, do not force the door shut; it will adhere to the door jamb, and it may get stuck in place.

Excessive Moisture

Humidity causes wood to swell. The issue is so common, and some builders require homeowners to keep the air conditioner running to honor the warranty.

Stripped Screws

Examine the screws that keep the door together. You will notice that the door starts to catch as you open or close it if they are stripped. Reduce the pressure when drilling the new screws as the door begins to lift into the stud.

Only One Side of the Door is Finished

After the doors have been painted, they are often glazed over with a clear finish to extend the wood’s lifespan. Alternatively, some homeowners opt for different finishes to give their doors a specific aesthetic, such as a stained or vintage look. If only one side of the door is painted, or if each side has a different finish, the door may warp.

Improper Sealing

Removing a door from the doorjamb and sealing it will not help if it is already warped. When you get a new door, make sure to seal all six sides while they are all even. Not many homeowners know, but the manufacturer or seller may void any existing warranties if you do not seal all six sides. If you are storing away new doors until they are ready to be installed, keep them somewhere dry.

Now that you know why your door may be warped, where can you find door repair Washington DC? When hiring a door installation Washington DC, MacArthur Locks & Doors is always there, seven days a week. They guarantee customer satisfaction, so you can rest assured that you get nothing but the best service.

Call Now ButtonCall Now